Explore the models and components, then open their specifications.
M5X motor series
Series illustration from the original documentation; identify the configuration by model.
M5X is the hydraulic motor component, including M5X80, M5X130, M5X180 and M5X250. It integrates relief, make-up and anti-reaction valves plus a mechanical parking brake. Compare displacement, pressure, speed and mass in the motor table.
Series illustration from the original documentation; identify the configuration by model.
FRG is the two-stage planetary reducer component. The matching table lists RG06D, RG08D, RG11D, RG12E, RG14D, RG16E, RG20D, RG23E and RG27D, retaining the source RG codes. Reducers can be requested separately; confirm ratio, output torque and dimensions for each motor/reducer pair.
In the sample code M5X130CHB-10/***-FRG11, M5X denotes the series, 130 the displacement code, CH the valve-cover code, B the built-in parking brake, 10 the male spline code, *** the relief setting, and FRG the reducer family. The example is not a complete ordering specification.
Source: Tailer catalogue 1, PDF page 43. Values apply to the configurations listed on that page.
M5X130 torque differs between source documents and requires confirmation. Multiple displacements denote catalogue configurations.
M5X63 appears in the assembly matching table only; standalone motor specifications are not inferred.
Showing 10 / 10 sizes
Scroll horizontally for all parameters
M5X–FRG FRG reducers and matched assemblies
Model / configuration
Matched motor
Reduction ratio
Assembly displacementcm³/rev
Assembly pressureMPa
Maximum output speedmin⁻¹
Output torqueN·m
RG06D
M5X63
19.2
1520
22.4
115
5400
RG08D
M5X80
19.04
1580
31.8
110
5748
RG11D
M5X130
19.64
2585
26
92
11000
RG12E
M5X130
20.56
2590
29
92
12200
RG14D / M5X130
M5X130
20.04
2590
32.4
92
14000
RG14D / M5X180
M5X180
20.04
3395
25.5
84
14000
RG16E
M5X180
To confirm
3600
29
84
16500
RG20D
M5X180
25.2
4539
28.6
67
20700
RG23E
M5X180
To confirm
4540
29
67
23400
RG27D
M5X250
25.2
6300
26.9
60
27000
Source: Tailer catalogue 1, PDF page 45. Values apply to the configurations listed on that page.
The family is named FRG; the source matching table uses RG model codes, retained here. Values apply to the listed motor/reducer combinations, not to every standalone reducer.
The RG16E and RG23E ratios are blank in the source and requires confirmation. Reducers may also be requested as separate components.
Review the configuration against the equipment duty and requirements.
Confirm mounting and controls using the complete model code.
Drawings & documents
Technical selection support
Review dimensions, connections and controls using the complete model code.
M5X–FRG technical selection
Share the full model code, nameplate and port requirements to obtain the appropriate dimensions and selection documents.